Make: Heller
Model: 1707 MK5 
Running Hours:  3,700
DOM: 2021
Reference No.: 500L

Information:

• 2021 HELLER 1707 MK5 REFLOW OVEN

• Item 1: Model 1707MK5 

  100% Forced Convection Reflow Oven with the following features and benefits:

  • 22″ Wide Mesh Belt Conveyor to accommodate PCB’s up to 22″ wide
  • 18” On Load Conveyor and 18” Off Load Conveyor
  • 73″ Heated Tunnel Length • 1 Internal Cooling Module with 15” of Cooling             
  • 14 Independent Temperature Controlled 350C Semi-Circular Balanced Flow “Lead Free”

     Heating Zones

  • Spike Zone Design for minimal liquidus time                          
  • Complete Computer Control System including:
  • Flat Panel Color Monitor, Keyboard & Mouse support
  • Complete Software Package including:
  • Windows based Computer     •  Windows Home Edition Software 
  • Password Protection
  • ECD CPK & SPC data and alarm logging with timed download or printout capability
  • Complete KIC & ECD Profiling & Storage Software including the following features:  
  • 5 Thermocouple “Real Time” profiling
  • Profile Storage/Overlay Software including the following features:
  • Profile Graph Storage of up to 500 graphs
  • Profile graph overlay of “benchmark” profile with current profile
  • Profile graph phase shifting to align two graphs
  • Moveable slope window providing average slope over given portion of graph
  • 6 color graphics to distinguish between graphs
  • PID temperature control to ensure zone temperature stability to +/- 1C
  • Signal Light Tower to indicate system status
  • 4 moveable casters for easy relocation around shop floor
  • Power controlled Clamshell Hood Lift        •  Single exhaust port for easy facilitation
  • 208/240V, 60 HZ, 3 phase, 100 AMPS per phase • Left to Right Conveyor Travel
  • Floor space requirements:  142″L x 59″W x 63″H
  • Enhanced Frame Design    • Breaker Over Current Protection
  • Factory training and installation  • 3 Year Warranty on Heaters & Blower Motors 
  • Optional Lifetime Warranty on Heaters & Blower Motors   

  Item 1:

  1707MK-17 – $49,900.00

  1707MK5 Ultra Low Nitrogen & Power Consumption Reflow Oven with

  Semi Circular Balanced Flow Heater Modules

  Item 2:

  208V-17-5 – $No Charge

  Electrical Operation 208/240 volt, 100 Amps

  Item 3:

  EHC-CS-17 – $8,900.00 

  Edge Hold Conveyor (Computer Adjust) with 4.8mm / .187” long EHC Pins with Heavy Duty Overhead Trolley Center Tack System,

  Front Rail Fixed – Maximum PCB with 22”

  Item 4:

  AL-17 – $1,625.00

  Automatic Lubrication System for Edge Hold Conveyor 

   

  Item 5:

  N2-17 – $11,200.00

  Inert Atmosphere < 100PPM of Oxygen

  (required on a nitrogen oven)

  Item 6:

  ULC-N2-17 – $3,975.00  

  Ultra Low Consumption Nitrogen – Auxiliary tunnels at entrance and exit of oven to reduce N2 consumption. Balance Flow heater modules to provide laminar flow and further reduce nitrogen consumption at 600-1200 SCFH (depending on PCB size). Tunnel will be configured for a max. PCB size of 22”

   (required on a nitrogen oven) includes mesh belt.

  Item 7:

  WLC-FF-17 – $19,985.00

  Open Loop Cyclonic Cool Pipe Water Cooling and Flux Separation System – Enhanced Blow-Thru Water Cooling Module for Ultra Low Product Exit Temperatures – Closed Loop Temperature Controlled Cooling Module for Controlling Cooling Slope –  Water must be a 50/50 mixture of ethylene glycol – does not include external chiller 

  Item 8:

  N2 ON/OFF-PC-17 – $1,350.00

  Nitrogen On/Off Capability (Computer Controlled)

   

  Item 9:

  OCL-17 – $8,200.00

  Open Loop Nitrogen Monitoring & Control System

  Item 10:

  BBU-17 – $1,350.00

  Battery Back-Up of Computer, Controller, Mesh Belt & Edge Hold Conveyor System

   

  Item 11:

  SMEMA-17 – $800.00

  SMEMA Sensors for Electrical Interface Up and Down Stream

  Item 12:

  IFSC-17 – $No Charge

  Closed Loop Computer Fan Speed Control of Heater Module Blowers

  (3 Groups – Top, Bottom & Reflow Zones; Speed Settings High, Medium & Low)

   

  Item 13: 

  CFSC-17 – $No Charge

  Closed Loop Computer Fan Speed Control of Cooling Module Blowers

   

  Item 14: 

  90YWTY-17 – $No Charge

  90 Day Reflow Oven Warranty, Installation & Training

  Item 15: 

  N2D-17 – $2,395.00

  Nitrogen to Air Reflow Oven Diverter to Eliminate the Chiller Requirement

  Note: N2 Diverter will be installed during the installation of the oven

  Item 16:

  ETL-17 – $3,995.00

  ETL Electrical and Safety Features to Comply Local Electrical Codes

   

  Item 17:

  35ITO-17 – $4,950.00

  45MM Clearance Above & Below the Edge Hold Conveyor Pins

   

   

  Item 18:

  FGT-17 – $No Charge

  Freight from Fremont, CA to St. Louis, MO

  Item 19:

  BA-17 – $No Charge

  Board Animation for Tracking PCB’s Through the Reflow Oven 

  Item 20:

  30IHM-17 – $No Charge

  30” Wide Heater Modules for Processing up to 22” Pub’s on the Edge Hold & Mesh Belt Conveyor Systems

  Item 21:

  HCM-17 – $No Charge

  Closed Loop Temperature Controlled Cooling Module for Controlling Cooling Slope

   

  Item 22:

  ECDHI-17- $No Charge

  Heller Industries CPK Monitoring & Profiling System Integrated into the

  Heller Reflow Oven

   

  Heller Industries is pleased to offer the above configuration totaling $118,535.00 to you.

• Please contact SMT Sales Group for additional information or to make an offer

Click the images below for additional views.

FAST response, within an hour or less.